Problem - potrzebuje rady i pomocy.

fungi · 3 Października 2004

Witam.

Troszke mnie niebylo, bo wyjechalem do Anglii i niemialem jak pisac na forum, wiec witam wszystkich po przerwie :hello:

Teraz do zeczy:

Sprawa wyglada tak: jakis czas temu, dalem zlecenie pewnemu specowi od stawiania serwerkow. No i postawil mi on serwerek, ktory dziala doskonale - przynajmniej z zewnatrz. Mozna przegladac wszystkie stronki zawarte na nim, mozna logowac sie do niego jako root i uzywac FTP. Jednak problem pojawia sie gdy proboje dostac sie na strony z wewnatrz sieci. Zakladajac ze serwer podpiety jest poprzez router, i poprzez ten sam router ja mam podpiety komp - terminal, niemoge ogladac zawartosci tegoz serwera, ani poprzez zewnetrzny adres IP, ani poprzez domene. Natomiast uzywajac wewnetrznego adresu IP (10.0.0.3) moge dostac sie na ftp, oraz zalogowac sie jako root, jednak nadal niemoge ogladac stronek na nim zawartych. Po wpisaniu w przegladarce adresu https://10.0.0.3 wywala mi informacje, ze serwer apache zostal pomyslnie zainstalowany, i ze jesli widoczna jest ta strona, nalezy skontaktowac sie z administratorem serwerka (ktorym zekomo jestem ja ). Ja na instalowaniu i stawioaniu serwerow znam sie jak bl;ondynka na komputerach - czyli prawie wcale (nie uragajac oczywiscie blonmdynkom - istnieja ponoc modele nieco odbiegajace od powszechnie znanej normy ;P ). Tak wiec potrzebuje Waszej rady - co zrobic, abym mogl przegladac stronki z sieci wewnetrznej postawione na tym serwerku ? Mam pelny dostep do serwera. Jednakze niemamn dostepu do routera (po wpisaniu z terminala, ktory przechodzi przez dany router, tracerouta na dowolna strone, zawsze pomija mi pierwszy krok (w ktortym to router powinien byc zawarty) pojawiaja sie slynne 1: * * * , dalej idzie prawidlowo - czyli wyswietla mi wszystkie dane o nastepnych serwerach.

Czekam z niecierpliwoscia na odpowiedz jakiegos fachowca

Pozdrawiam.

Fungi

rattkin · 3 Października 2004

troche zamotales, ciezko sie rozeznac. rozumiem ze schemat sieci wyglada tak :


             net

              |

serwer-----router-----stacje robocze

czy router to linux, czy sprzetowy (pudelko?). wyglada na to ze zle ustawiona jest translacja adresow sieci roboczych.

Po wpisaniu w przegladarce adresu https://10.0.0.3 wywala mi informacje, ze serwer apache zostal pomyslnie zainstalowany

dziwne, wyglada ze w samym apachu jest jakies dziwne przekierowanie (htdocs), albo ustawiony jest serwer wirtualny. trudno cos na odleglosc wymyslic. najprosciej chyba zadzwonic do owego speca i poprosic o wyjasnienie...

fungi · 3 Października 2004

Witam. Schemat jest dokladnie taki jak narysowales. Router to pudelko - dokladnie tak jak napisales.

wyglada na to ze zle ustawiona jest translacja adresow sieci roboczych.

Tzn co powinienem zrobic zeby bylo to ustawione dobrze - to jest sprawa routyera czy serwera ?.

Thnx za szybka odpowiedz.

Igor · 3 Października 2004

Musisz przekierować porty na routerze 80 dla WWW i 21, jeżeli korzystasz z FTP. Zależy, jaki masz router, ale tu chyba dobrze opisane:

https://www.searchengines.pl/phpbb203/index...showtopic=10711

Powodzenia!

stub · 4 Października 2004

no ale skoro wpisze wew_ip to wyswietla strone domyslnej instalacji apache, wiec przekierowanie nic nie da . najlepiej pogadaj z adminem, zwroccie uwage na dns.

Igor · 4 Października 2004

no ale skoro wpisze wew_ip to wyswietla strone domyslnej instalacji apache, wiec przekierowanie nic nie da . najlepiej pogadaj z adminem, zwroccie uwage na dns.

Masz rację stub. Nie dokładnie przeczytałęm post. Ma raczej problemy z Apachem, z ustawieniami scieżki do katalogu.

stub · 4 Października 2004

no konfiguracja sieci taka jest, wszystko zalezy od ... jak to jest np w domenie windows to na sztywno w dns czy jak sie nazywa usluga przypisac domena.com < - > wew_ip , no ale to zalezy jaka siec itp. ustawienia apacha sa tez raczej wporzadku, skoro z zewnatrz radzi sobie z tym dobrze. mnie sie wydaje ze i tak najlepiej bedzie wiedzial admin tej sieci. 8)

fungi · 4 Października 2004

a co jesli kurde admin sieci rozplynal sie w powietrzu ? - poradzcie cos konkretnego

Czy np niemoge wejsc na stronke wpisujac dokladnego katalogu juz na serwerze - albo jakos tak kombinujac.

Jesli mam np stronki na serwerze w katalogu: /home/strony/www.darpol.org - i jak na 10.0.0.3 wyswietla mi ta testowa strone - czy istrnieje jakas szansa zebym wlazl z wewnatrz wpisujac jakas konkretna sciezke ?

stub · 4 Października 2004

jezeli to jedna domena na tym serwerze i nie ma virtual, to najprosciej (niekoniecznie najlepiej) ale i zapewne najszybciej, wyczysc glowny katalog apacha (example /usr/local/www/data-dist) i tam skopiuj swoja witryne, tam musi sie znalezc index. z tego co mowisz po wpisaniu wew_ip odpala ci sie defaultowa strona apacha, wiec wtedy odpali ci sie twoja . no ale to tylko jezeli masz tylko jedna domene i wiecej miec nie bedziesz.

rattkin · 4 Października 2004

to bedzie troche fuszera , ale zadziala.

jesli masz dostep do serwera, to zamiesc plik httpd.conf z apacza. diagnozowanie problemow w powietrzu i na odleglosc jest trudne :/

Igor · 4 Października 2004

a co jesli kurde admin sieci rozplynal sie w powietrzu ? - poradzcie cos konkretnego
Czy np niemoge wejsc na stronke wpisujac dokladnego katalogu juz na serwerze - albo jakos tak kombinujac.

Jesli mam np stronki na serwerze w katalogu: /home/strony/www.darpol.org - i jak na 10.0.0.3 wyswietla mi ta testowa strone - czy istrnieje jakas szansa zebym wlazl z wewnatrz wpisujac jakas konkretna sciezke ?

Najpierw wpisz Ip: 127.0.0.1 , albo localhost. Jeżeli będzie znowu to samo,

to oznacza, ze Apache nie widzi katalogu ze stroną, czyli w pliku httpd.conf masz zle ustawienia. A jężeli pojawi się strona, to w pliku HOSTS, który znajduje się w katalogu windows/system32/drivers/etc, (przykład WIN XP), wpisz taki wiersz:

127.0.0.1 twoja domena

10.0.0.3 twoja domena

Po zmianie - reset serwera.

fungi · 4 Października 2004

jesli masz dostep do serwera, to zamiesc plik httpd.conf z apacza. diagnozowanie problemow w powietrzu i na odleglosc jest trudne :/

Uwaga flood:

##

## httpd.conf -- Apache HTTP server configuration file

##

#

# Based upon the NCSA server configuration files originally by Rob McCool.

#

# This is the main Apache server configuration file. It contains the

# configuration directives that give the server its instructions.

# See <URL:https://www.apache.org/docs/> for detailed information about

# the directives.

#

# Do NOT simply read the instructions in here without understanding

# what they do. They're here only as hints or reminders. If you are unsure

# consult the online docs. You have been warned.

#

# After this file is processed, the server will look for and process

# /etc/apache/srm.conf and then /etc/apache/access.conf

# unless you have overridden these with ResourceConfig and/or

# AccessConfig directives here.

#

# The configuration directives are grouped into three basic sections:

# 1. Directives that control the operation of the Apache server process as a

# whole (the 'global environment').

# 2. Directives that define the parameters of the 'main' or 'default' server,

# which responds to requests that aren't handled by a virtual host.

# These directives also provide default values for the settings

# of all virtual hosts.

# 3. Settings for virtual hosts, which allow Web requests to be sent to

# different IP addresses or hostnames and have them handled by the

# same Apache server process.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path. If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"

# with ServerRoot set to "/usr/local/apache" will be interpreted by the

# server as "/usr/local/apache/logs/foo.log".

#

### Section 1: Global Environment

#

# The directives in this section affect the overall operation of Apache,

# such as the number of concurrent requests it can handle or where it

# can find its configuration files.

#

# ServerType is either inetd, or standalone. Inetd mode is only supported on

# Unix platforms.

#

ServerType standalone

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# NOTE! If you intend to place this on an NFS (or otherwise network)

# mounted filesystem then please read the LockFile documentation

# (available at <URL:https://www.apache.org/docs/mod/core.html#lockfile>);

# you will save yourself a lot of trouble.

#

ServerRoot "/usr"

#

# The LockFile directive sets the path to the lockfile used when Apache

# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or

# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at

# its default value. The main reason for changing it is if the logs

# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL

# DISK. The PID of the main server process is automatically appended to

# the filename.

#

#LockFile /var/run/httpd.lock

#

# PidFile: The file in which the server should record its process

# identification number when it starts.

#

PidFile /var/run/httpd.pid

#

# ScoreBoardFile: File used to store internal server process information.

# Not all architectures require this. But if yours does (you'll know because

# this file will be created when you run Apache) then you *must* ensure that

# no two invocations of Apache share the same scoreboard file.

#

ScoreBoardFile /var/run/httpd.scoreboard

#

# In the standard configuration, the server will process httpd.conf (this

# file, specified by the -f command line option), srm.conf, and access.conf

# in that order. The latter two files are now distributed empty, as it is

# recommended that all directives be kept in a single file for simplicity.

# The commented-out values below are the built-in defaults. You can have the

# server ignore these files altogether by using "/dev/null" (for Unix) or

# "nul" (for Win32) for the arguments to the directives.

#

#ResourceConfig /etc/apache/srm.conf

#AccessConfig /etc/apache/access.conf

#

# Timeout: The number of seconds before receives and sends time out.

#

Timeout 300

#

# KeepAlive: Whether or not to allow persistent connections (more than

# one request per connection). Set to "Off" to deactivate.

#

KeepAlive On

#

# MaxKeepAliveRequests: The maximum number of requests to allow

# during a persistent connection. Set to 0 to allow an unlimited amount.

# We recommend you leave this number high, for maximum performance.

#

MaxKeepAliveRequests 100

#

# KeepAliveTimeout: Number of seconds to wait for the next request from the

# same client on the same connection.

#

KeepAliveTimeout 15

#

# Server-pool size regulation. Rather than making you guess how many

# server processes you need, Apache dynamically adapts to the load it

# sees --- that is, it tries to maintain enough server processes to

# handle the current load, plus a few spare servers to handle transient

# load spikes (e.g., multiple simultaneous requests from a single

# Netscape browser).

#

# It does this by periodically checking how many servers are waiting

# for a request. If there are fewer than MinSpareServers, it creates

# a new spare. If there are more than MaxSpareServers, some of the

# spares die off. The default values are probably OK for most sites.

#

MinSpareServers 5

MaxSpareServers 10

#

# Number of servers to start initially --- should be a reasonable ballpark

# figure.

#

StartServers 5

#

# Limit on total number of servers running, i.e., limit on the number

# of clients who can simultaneously connect --- if this limit is ever

# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.

# It is intended mainly as a brake to keep a runaway server from taking

# the system with it as it spirals down...

#

MaxClients 150

#

# MaxRequestsPerChild: the number of requests each child process is

# allowed to process before the child dies. The child will exit so

# as to avoid problems after prolonged use when Apache (and maybe the

# libraries it uses) leak memory or other resources. On most systems, this

# isn't really needed, but a few (such as Solaris) do have notable leaks

# in the libraries. For these platforms, set to something like 10000

# or so; a setting of 0 means unlimited.

#

# NOTE: This value does not include keepalive requests after the initial

# request per connection. For example, if a child process handles

# an initial request and 10 subsequent "keptalive" requests, it

# would only count as 1 request towards this limit.

#

MaxRequestsPerChild 0

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

#

#Listen 3000

#Listen 12.34.56.78:80

#

# BindAddress: You can support virtual hosts with this option. This directive

# is used to tell the server which IP address to listen to. It can either

# contain "*", an IP address, or a fully qualified Internet domain name.

# See also the <VirtualHost> and Listen directives.

#

#BindAddress *

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Please read the file https://httpd.apache.org/docs/dso.html for more

# details about the DSO mechanism and run `httpd -l' for the list of already

# built-in (statically linked and thus always available) modules in your httpd

# binary.

#

# Note: The order in which modules are loaded is important. Don't change

# the order below without expert advice.

#

# Example:

# LoadModule foo_module libexec/mod_foo.so

LoadModule vhost_alias_module libexec/apache/mod_vhost_alias.so

LoadModule env_module libexec/apache/mod_env.so

LoadModule define_module libexec/apache/mod_define.so

LoadModule config_log_module libexec/apache/mod_log_config.so

LoadModule mime_magic_module libexec/apache/mod_mime_magic.so

LoadModule mime_module libexec/apache/mod_mime.so

LoadModule negotiation_module libexec/apache/mod_negotiation.so

LoadModule status_module libexec/apache/mod_status.so

LoadModule info_module libexec/apache/mod_info.so

LoadModule includes_module libexec/apache/mod_include.so

LoadModule autoindex_module libexec/apache/mod_autoindex.so

LoadModule dir_module libexec/apache/mod_dir.so

LoadModule cgi_module libexec/apache/mod_cgi.so

LoadModule asis_module libexec/apache/mod_asis.so

LoadModule imap_module libexec/apache/mod_imap.so

LoadModule action_module libexec/apache/mod_actions.so

LoadModule speling_module libexec/apache/mod_speling.so

LoadModule userdir_module libexec/apache/mod_userdir.so

LoadModule alias_module libexec/apache/mod_alias.so

LoadModule rewrite_module libexec/apache/mod_rewrite.so

LoadModule access_module libexec/apache/mod_access.so

LoadModule auth_module libexec/apache/mod_auth.so

LoadModule anon_auth_module libexec/apache/mod_auth_anon.so

LoadModule dbm_auth_module libexec/apache/mod_auth_dbm.so

LoadModule digest_module libexec/apache/mod_digest.so

LoadModule proxy_module libexec/apache/libproxy.so

LoadModule cern_meta_module libexec/apache/mod_cern_meta.so

LoadModule expires_module libexec/apache/mod_expires.so

LoadModule headers_module libexec/apache/mod_headers.so

LoadModule usertrack_module libexec/apache/mod_usertrack.so

LoadModule unique_id_module libexec/apache/mod_unique_id.so

LoadModule setenvif_module libexec/apache/mod_setenvif.so

# Reconstruction of the complete module list from all available modules

# (static and shared ones) to achieve correct module execution order.

# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]

ClearModuleList

AddModule mod_vhost_alias.c

AddModule mod_env.c

AddModule mod_define.c

AddModule mod_log_config.c

AddModule mod_mime_magic.c

AddModule mod_mime.c

AddModule mod_negotiation.c

AddModule mod_status.c

AddModule mod_info.c

AddModule mod_include.c

AddModule mod_autoindex.c

AddModule mod_dir.c

AddModule mod_cgi.c

AddModule mod_asis.c

AddModule mod_imap.c

AddModule mod_actions.c

AddModule mod_speling.c

AddModule mod_userdir.c

AddModule mod_alias.c

AddModule mod_rewrite.c

AddModule mod_access.c

AddModule mod_auth.c

AddModule mod_auth_anon.c

AddModule mod_auth_dbm.c

AddModule mod_digest.c

AddModule mod_proxy.c

AddModule mod_cern_meta.c

AddModule mod_expires.c

AddModule mod_headers.c

AddModule mod_usertrack.c

AddModule mod_unique_id.c

AddModule mod_so.c

AddModule mod_setenvif.c

#

# ExtendedStatus controls whether Apache will generate "full" status

# information (ExtendedStatus On) or just basic information (ExtendedStatus

# Off) when the "server-status" handler is called. The default is Off.

#

#ExtendedStatus On

### Section 2: 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition. These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

# If your ServerType directive (set earlier in the 'Global Environment'

# section) is set to "inetd", the next few directives don't have any

# effect since their settings are defined by the inetd configuration.

# Skip ahead to the ServerAdmin directive.

#

# Port: The port to which the standalone server listens. For

# ports < 1023, you will need httpd to be run as root initially.

#

Port 80

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

#

# User/Group: The name (or #number) of the user/group to run httpd as.

# . On SCO (ODT 3) use "User nouser" and "Group nogroup".

# . On HPUX you may not be able to use shared memory as nobody, and the

# suggested workaround is to create a user www and use that user.

# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)

# when the value of (unsigned)Group is above 60000;

# don't use Group "#-1" on these systems!

#

User nobody

Group nobody

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed. This address appears on some server-generated pages, such

# as error documents.

#

ServerAdmin admin@darpol.org

#

# ServerName allows you to set a host name which is sent back to clients for

# your server if it's different than the one the program would get (i.e., use

# "www" instead of the host's real name).

#

# Note: You cannot just invent host names and hope they work. The name you

# define here must be a valid DNS name for your host. If you don't understand

# this, ask your network administrator.

# If your host doesn't have a registered DNS name, enter its IP address here.

# You will have to access it by its address (e.g., https://123.45.67.89/)

# anyway, and this will make redirections work in a sensible way.

#

# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your

# machine always knows itself by this address. If you use Apache strictly for

# local testing and development, you may use 127.0.0.1 as the server name.

#

ServerName DARPOL.ORG

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot "/var/www/htdocs"

#

# Each directory to which Apache has access, can be configured with respect

# to which services and features are allowed and/or disabled in that

# directory (and its subdirectories).

#

# First, we configure the "default" to be a very restrictive set of

# permissions.

#

Options FollowSymLinks

AllowOverride None

</Directory>

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

# This should be changed to whatever you set DocumentRoot to.

#

#

# This may also be "None", "All", or any combination of "Indexes",

# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".

#

# Note that "MultiViews" must be named *explicitly* --- "Options All"

# doesn't give it to you.

#

Options Indexes FollowSymLinks MultiViews

#

# This controls which options the .htaccess files in directories can

# override. Can also be "All", or any combination of "Options", "FileInfo",

# "AuthConfig", and "Limit"

#

AllowOverride None

#

# Controls who can get stuff from this server.

#

Order allow,deny

Allow from all

</Directory>

#

# UserDir: The name of the directory which is appended onto a user's home

# directory if a ~user request is received.

#

#<IfModule mod_userdir.c>

# UserDir public_html

#</IfModule>

#

# Control access to UserDir directories. The following is an example

# for a site where these directories are restricted to read-only.

#

#<Directory /home/*/public_html>

# AllowOverride FileInfo AuthConfig Limit

# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec

# <Limit GET POST OPTIONS PROPFIND>

# Order allow,deny

# Allow from all

# </Limit>

# <LimitExcept GET POST OPTIONS PROPFIND>

# Order deny,allow

# Deny from all

# </LimitExcept>

#</Directory>

#

# DirectoryIndex: Name of the file or files to use as a pre-written HTML

# directory index. Separate multiple entries with spaces.

#

DirectoryIndex index.htm index.html index.php

</IfModule>

#

# AccessFileName: The name of the file to look for in each directory

# for access control information.

#

AccessFileName .htaccess

#

# The following lines prevent .htaccess files from being viewed by

# Web clients. Since .htaccess files often contain authorization

# information, access is disallowed for security reasons. Comment

# these lines out if you want Web visitors to see the contents of

# .htaccess files. If you change the AccessFileName directive above,

# be sure to make the corresponding changes here.

#

# Also, folks tend to use names such as .htpasswd for password

# files, so this will protect those as well.

#

Order allow,deny

Deny from all

Satisfy All

</Files>

#

# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each

# document that was negotiated on the basis of content. This asks proxy

# servers not to cache the document. Uncommenting the following line disables

# this behavior, and proxies will be allowed to cache the documents.

#

#CacheNegotiatedDocs

#

# UseCanonicalName: (new for 1.3) With this setting turned on, whenever

# Apache needs to construct a self-referencing URL (a URL that refers back

# to the server the response is coming from) it will use ServerName and

# Port to form a "canonical" name. With this setting off, Apache will

# use the hostname:port that the client supplied, when possible. This

# also affects SERVER_NAME and SERVER_PORT in CGI scripts.

#

#UseCanonicalName On

#

# TypesConfig describes where the mime.types file (or equivalent) is

# to be found.

#

TypesConfig /etc/apache/mime.types

</IfModule>

#

# DefaultType is the default MIME type the server will use for a document

# if it cannot otherwise determine one, such as from filename extensions.

# If your server contains mostly text or HTML documents, "text/plain" is

# a good value. If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.

#

DefaultType text/plain

#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type. The MIMEMagicFile

# directive tells the module where the hint definitions are located.

# mod_mime_magic is not part of the default server (you have to add

# it yourself with a LoadModule [see the DSO paragraph in the 'Global

# Environment' section], or recompile the server and include mod_mime_magic

# as part of the configuration), so it's enclosed in an <IfModule> container.

# This means that the MIMEMagicFile directive will only be processed if the

# module is part of the server.

#

MIMEMagicFile /etc/apache/magic

</IfModule>

#

# HostnameLookups: Log the names of clients or just their IP addresses

# e.g., www.apache.org (on) or 204.62.129.132 (off).

# The default is off because it'd be overall better for the net if people

# had to knowingly turn this feature on, since enabling it means that

# each client request will result in AT LEAST one lookup request to the

# nameserver.

#

HostnameLookups On

#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here. If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog /var/log/apache/error_log

#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn

#

# The following directives define some format nicknames for use with

# a CustomLog directive (see below).

#

LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined

LogFormat "%h %l %u %t "%r" %>s %b" common

LogFormat "%{Referer}i -> %U" referer

LogFormat "%{User-agent}i" agent

#

# The location and format of the access logfile (Common Logfile Format).

# If you do not define any access logfiles within a <VirtualHost>

# container, they will be logged here. Contrariwise, if you *do*

# define per-<VirtualHost> access logfiles, transactions will be

# logged therein and *not* in this file.

#

CustomLog /var/log/apache/access_log common

#

# If you would like to have agent and referer logfiles, uncomment the

# following directives.

#

#CustomLog /var/log/apache/referer_log referer

#CustomLog /var/log/apache/agent_log agent

#

# If you prefer a single logfile with access, agent, and referer information

# (Combined Logfile Format) you can use the following directive.

#

#CustomLog /var/log/apache/access_log combined

#

# Optionally add a line containing the server version and virtual host

# name to server-generated pages (error documents, FTP directory listings,

# mod_status and mod_info output etc., but not CGI generated documents).

# Set to "EMail" to also include a mailto: link to the ServerAdmin.

# Set to one of: On | Off | EMail

#

ServerSignature On

# EBCDIC configuration:

# (only for mainframes using the EBCDIC codeset, currently one of:

# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!

# The following default configuration assumes that "text files"

# are stored in EBCDIC (so that you can operate on them using the

# normal POSIX tools like grep and sort) while "binary files" are

# stored with identical octets as on an ASCII machine.

#

# The directives are evaluated in configuration file order, with

# the EBCDICConvert directives applied before EBCDICConvertByType.

#

# If you want to have ASCII HTML documents and EBCDIC HTML documents

# at the same time, you can use the file extension to force

# conversion off for the ASCII documents:

# > AddType text/html .ahtml

# > EBCDICConvert Off=InOut .ahtml

#

# EBCDICConvertByType On=InOut text/* message/* multipart/*

# EBCDICConvertByType On=In application/x-www-form-urlencoded

# EBCDICConvertByType On=InOut application/postscript model/vrml

# EBCDICConvertByType Off=InOut */*

#

# Aliases: Add here as many aliases as you need (with no limit). The format is

# Alias fakename realname

#

#

# Note that if you include a trailing / on fakename then the server will

# require it to be present in the URL. So "/icons" isn't aliased in this

# example, only "/icons/". If the fakename is slash-terminated, then the

# realname must also be slash terminated, and if the fakename omits the

# trailing slash, the realname must also omit it.

#

Alias /icons/ "/var/www/icons/"

Options Indexes MultiViews

AllowOverride None

Order allow,deny

Allow from all

</Directory>

# This Alias will project the on-line documentation tree under /manual/

# even if you change the DocumentRoot. Comment it if you don't want to

# provide access to the on-line documentation.

#

Alias /manual/ "/var/www/htdocs/manual/"

Options Indexes FollowSymlinks MultiViews

AllowOverride None

Order allow,deny

Allow from all

</Directory>

#

# ScriptAlias: This controls which directories contain server scripts.

# ScriptAliases are essentially the same as Aliases, except that

# documents in the realname directory are treated as applications and

# run by the server when requested rather than as documents sent to the client.

# The same rules about trailing "/" apply to ScriptAlias directives as to

# Alias.

#

ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

#

# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

AllowOverride None

Options None

Order allow,deny

Allow from all

</Directory>

</IfModule>

# End of aliases.

#

# Redirect allows you to tell clients about documents which used to exist in

# your server's namespace, but do not anymore. This allows you to tell the

# clients where to look for the relocated document.

# Format: Redirect old-URI new-URL

#

# Directives controlling the display of server-generated directory listings.

#

#

# FancyIndexing is whether you want fancy directory indexing or standard

#

IndexOptions FancyIndexing

#

# AddIcon* directives tell the server which icon to show for different

# files or filename extensions. These are only displayed for

# FancyIndexed directories.

#

AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*

AddIconByType (IMG,/icons/image2.gif) image/*

AddIconByType (SND,/icons/sound2.gif) audio/*

AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe

AddIcon /icons/binhex.gif .hqx

AddIcon /icons/tar.gif .tar

AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv

AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip

AddIcon /icons/a.gif .ps .ai .eps

AddIcon /icons/layout.gif .html .shtml .htm .pdf

AddIcon /icons/text.gif .txt

AddIcon /icons/c.gif .c

AddIcon /icons/p.gif .pl .py

AddIcon /icons/f.gif .for

AddIcon /icons/dvi.gif .dvi

AddIcon /icons/uuencoded.gif .uu

AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl

AddIcon /icons/tex.gif .tex

AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..

AddIcon /icons/hand.right.gif README

AddIcon /icons/folder.gif ^^DIRECTORY^^

AddIcon /icons/blank.gif ^^BLANKICON^^

#

# DefaultIcon is which icon to show for files which do not have an icon

# explicitly set.

#

DefaultIcon /icons/unknown.gif

#

# AddDescription allows you to place a short description after a file in

# server-generated indexes. These are only displayed for FancyIndexed

# directories.

# Format: AddDescription "description" filename

#

#AddDescription "GZIP compressed document" .gz

#AddDescription "tar archive" .tar

#AddDescription "GZIP compressed tar archive" .tgz

#

# ReadmeName is the name of the README file the server will look for by

# default, and append to directory listings.

#

# HeaderName is the name of a file which should be prepended to

# directory indexes.

#

ReadmeName README

HeaderName HEADER

#

# IndexIgnore is a set of filenames which directory indexing should ignore

# and not include in the listing. Shell-style wildcarding is permitted.

#

IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

</IfModule>

# End of indexing directives.

#

# Document types.

#

#

# AddLanguage allows you to specify the language of a document. You can

# then use content negotiation to give a browser a file in a language

# it can understand.

#

# Note 1: The suffix does not have to be the same as the language

# keyword --- those with documents in Polish (whose net-standard

# language code is pl) may wish to use "AddLanguage pl .po" to

# avoid the ambiguity with the common suffix for perl scripts.

#

# Note 2: The example entries below illustrate that in quite

# some cases the two character 'Language' abbreviation is not

# identical to the two character 'Country' code for its country,

# E.g. 'Danmark/dk' versus 'Danish/da'.

#

# Note 3: In the case of 'ltz' we violate the RFC by using a three char

# specifier. But there is 'work in progress' to fix this and get

# the reference data for rfc1766 cleaned up.

#

# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)

# French (fr) - German (de) - Greek-Modern (el)

# Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)

# Portugese (pt) - Luxembourgeois* (ltz)

# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)

# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)

# Russian (ru)

#

AddLanguage da .dk

AddLanguage nl .nl

AddLanguage en .en

AddLanguage et .ee

AddLanguage fr .fr

AddLanguage de .de

AddLanguage el .el

AddLanguage he .he

AddCharset ISO-8859-8 .iso8859-8

AddLanguage it .it

AddLanguage ja .ja

AddCharset ISO-2022-JP .jis

AddLanguage kr .kr

AddCharset ISO-2022-KR .iso-kr

AddLanguage nn .nn

AddLanguage no .no

AddLanguage pl .po

AddCharset ISO-8859-2 .iso-pl

AddLanguage pt .pt

AddLanguage pt-br .pt-br

AddLanguage ltz .lu

AddLanguage ca .ca

AddLanguage es .es

AddLanguage sv .sv

AddLanguage cs .cz .cs

AddLanguage ru .ru

AddLanguage zh-TW .zh-tw

AddCharset Big5 .Big5 .big5

AddCharset WINDOWS-1251 .cp-1251

AddCharset CP866 .cp866

AddCharset ISO-8859-5 .iso-ru

AddCharset KOI8-R .koi8-r

AddCharset UCS-2 .ucs2

AddCharset UCS-4 .ucs4

AddCharset UTF-8 .utf8

# LanguagePriority allows you to give precedence to some languages

# in case of a tie during content negotiation.

#

# Just list the languages in decreasing order of preference. We have

# more or less alphabetized them here. You probably want to change this.

#

LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw

</IfModule>

#

# AddType allows you to tweak mime.types without actually editing it, or to

# make certain files to be certain types.

#

AddType application/x-tar .tgz

#

# AddEncoding allows you to have certain browsers uncompress

# information on the fly. Note: Not all browsers support this.

# Despite the name similarity, the following Add* directives have nothing

# to do with the FancyIndexing customization directives above.

#

AddEncoding x-compress .Z

AddEncoding x-gzip .gz .tgz

#

# If the AddEncoding directives above are commented-out, then you

# probably should define those extensions to indicate media types:

#

#AddType application/x-compress .Z

#AddType application/x-gzip .gz .tgz

#

# AddHandler allows you to map certain file extensions to "handlers",

# actions unrelated to filetype. These can be either built into the server

# or added with the Action command (see below)

#

# If you want to use server side includes, or CGI outside

# ScriptAliased directories, uncomment the following lines.

#

# To use CGI scripts:

#

#AddHandler cgi-script .cgi

#

# To use server-parsed HTML files

#

#AddType text/html .shtml

#AddHandler server-parsed .shtml

#

# Uncomment the following line to enable Apache's send-asis HTTP file

# feature

#

#AddHandler send-as-is asis

#

# If you wish to use server-parsed imagemap files, use

#

#AddHandler imap-file map

#

# To enable type maps, you might want to use

#

#AddHandler type-map var

</IfModule>

# End of document types.

#

# Action lets you define media types that will execute a script whenever

# a matching file is called. This eliminates the need for repeated URL

# pathnames for oft-used CGI file processors.

# Format: Action media/type /cgi-script/location

# Format: Action handler-name /cgi-script/location

#

# MetaDir: specifies the name of the directory in which Apache can find

# meta information files. These files contain additional HTTP headers

# to include when sending the document

#

#MetaDir .web

#

# MetaSuffix: specifies the file name suffix for the file containing the

# meta information.

#

#MetaSuffix .meta

#

# Customizable error response (Apache style)

# these come in three flavors

#

# 1) plain text

#ErrorDocument 500 "The server made a boo boo.

# n.b. the single leading (") marks it as text, it does not get output

#

# 2) local redirects

#ErrorDocument 404 /missing.html

# to redirect to local URL /missing.html

#ErrorDocument 404 /cgi-bin/missing_handler.pl

# N.B.: You can redirect to a script or a document using server-side-includes.

#

# 3) external redirects

#ErrorDocument 402 https://some.other-server.com/subscription_info.html

# N.B.: Many of the environment variables associated with the original

# request will *not* be available to such a script.

#

# Customize behaviour based on the browser

#

#

# The following directives modify normal HTTP response behavior.

# The first directive disables keepalive for Netscape 2.x and browsers that

# spoof it. There are known problems with these browser implementations.

# The second directive is for Microsoft Internet Explorer 4.0b2

# which has a broken HTTP/1.1 implementation and does not properly

# support keepalive when it is used on 301 or 302 (redirect) responses.

#

BrowserMatch "Mozilla/2" nokeepalive

BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0

#

# The following directive disables HTTP/1.1 responses to browsers which

# are in violation of the HTTP/1.0 spec by not being able to grok a

# basic 1.1 response.

#

BrowserMatch "RealPlayer 4.0" force-response-1.0

BrowserMatch "Java/1.0" force-response-1.0

BrowserMatch "JDK/1.0" force-response-1.0

</IfModule>

# End of browser customization directives

#

# Allow server status reports, with the URL of https://servername/server-status

# Change the ".your-domain.com" to match your domain to enable.

#

#<Location /server-status>

# SetHandler server-status

# Order deny,allow

# Deny from all

# Allow from .your-domain.com

#</Location>

#

# Allow remote server configuration reports, with the URL of

# https://servername/server-info (requires that mod_info.c be loaded).

# Change the ".your-domain.com" to match your domain to enable.

#

#<Location /server-info>

# SetHandler server-info

# Order deny,allow

# Deny from all

# Allow from .your-domain.com

#</Location>

#

# There have been reports of people trying to abuse an old bug from pre-1.1

# days. This bug involved a CGI script distributed as a part of Apache.

# By uncommenting these lines you can redirect these attacks to a logging

# script on phf.apache.org. Or, you can record them yourself, using the script

# support/phf_abuse_log.cgi.

#

#<Location /cgi-bin/phf*>

# Deny from all

# ErrorDocument 403 https://phf.apache.org/phf_abuse_log.cgi

#</Location>

#

# Proxy Server directives. Uncomment the following lines to

# enable the proxy server:

#

#<IfModule mod_proxy.c>

# ProxyRequests On

# <Directory proxy:*>

# Order deny,allow

# Deny from all

# Allow from .your-domain.com

# </Directory>

#

# Enable/disable the handling of HTTP/1.1 "Via:" headers.

# ("Full" adds the server version; "Block" removes all outgoing Via: headers)

# Set to one of: Off | On | Full | Block

#

# ProxyVia On

#

# To enable the cache as well, edit and uncomment the following lines:

# (no cacheing without CacheRoot)

#

# CacheRoot "/var/cache/proxy"

# CacheSize 5

# CacheGcInterval 4

# CacheMaxExpire 24

# CacheLastModifiedFactor 0.1

# CacheDefaultExpire 1

# NoCache a-domain.com another-domain.edu joes.garage-sale.com

#</IfModule>

# End of proxy directives.

### Section 3: Virtual Hosts

#

# VirtualHost: If you want to maintain multiple domains/hostnames on your

# machine you can setup VirtualHost containers for them. Most configurations

# use only name-based virtual hosts so the server doesn't need to worry about

# IP addresses. This is indicated by the asterisks in the directives below.

#

# Please see the documentation at <URL:https://www.apache.org/docs/vhosts/>

# for further details before you try to setup virtual hosts.

#

# You may use the command line option '-S' to verify your virtual host

# configuration.

#

# Use name-based virtual hosting.

#

#NameVirtualHost *:80

#

# VirtualHost example:

# Almost any Apache directive may go into a VirtualHost container.

# The first VirtualHost section is used for requests without a known

# server name.

#

#<VirtualHost *:80>

# ServerAdmin webmaster@dummy-host.example.com

# DocumentRoot /www/docs/dummy-host.example.com

# ServerName dummy-host.example.com

# ErrorLog logs/dummy-host.example.com-error_log

# CustomLog logs/dummy-host.example.com-access_log common

#</VirtualHost>

# By default, all external Apache modules are disabled. To enable a particular

# module for Apache, make sure the necessary packages are installed. Then

# uncomment the appropriate Include line below, save the file, and restart

# Apache. Note that some modules may need additional configuration steps. For

# example, mod_ssl requires a site certificate which you may need to generate.

#

# Lastly, if you remove a module package, be sure to edit this file and comment

# out the appropriate Include line.

# ==> mod_php configuration settings <==

#

# PACKAGES REQUIRED: openssl-solibs (A series) and/or openssl (N series),

# mysql (AP series), gmp (L series), and apache (N series)

#

Include /etc/apache/mod_php.conf

# ==> mod_ssl configuration settings <==

#

# PACKAGES REQUIRED: apache (N series) and openssl (N series)

#

Include /etc/apache/mod_ssl.conf

# ==> mod_dynvhost configuration settings <==

#

# PACKAGES REQUIRED: apache (N series) and openssl (N series)

#

Include /etc/apache/mod_dynvhost.conf

fungi · 4 Października 2004

Zrobilem inny motyw:

Z tego pliku httpd.con z linijki: DocumentRoot: [zmienilem na:]/home/strony

ale teraz mam blad 403 - "You don't have permission to access / on this server." b;lah - kombinuje dalej :/

Jak ktos ma jakis pomysl to bede wdzieczny :>

PS Dodam tylko ze w katalogu /home/strony mam zawarte wszystkie moje witryny, w podkatalogach np: /home/strony/www.xxx.xxx i myslalem ze jak dam to DocumentRoot na katalog w ktorych mam stronki to ze mi wyswietli podkatalogi i bede sobie normalnie mogl wybrac stronke na ktora chce wejsc - no ale znowu cos z prawami dostepu - kurde mam dosc

rattkin · 4 Października 2004

ServerRoot "/usr"

ustaw na katalog apacha (ie. /usr/bin/apache)

DocumentRoot "/var/www/htdocs"

ustaw na katalog gdzie masz strony. katalogowi i wszystkim plikom w nim nadaj uprawnienia odczytu/wykonania dla 'others'.

mozna to zrobic w mc (taki linuxowy norton commander) - 'advanced chown', albo z linii polecen -

chmod -R 0755 katalog

to polecenie ustawi uprawnienia dla katalogu i wszystkiego w srodku - rekursywnie.

zasada jest taka, ze jesli ogladasz strone to jestes 'otherem' i musisz miec uprawnienia "zagladu" i "odczytu" czyli executable i read. jak znowu jakis blad z permisjami to ustawiaj kolejne pliki i katalogi na takie

# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either

# contain "*", an IP address, or a fully qualified Internet domain name.

# See also the <VirtualHost> and Listen directives.

#

#BindAddress *

sami mowia co trzeba zrobic. ja tutaj mam domene.

ServerName DARPOL.ORG

prawdziwa domena? zrobilbym malymi literami na wszelki wypadek

#
# This should be changed to whatever you set DocumentRoot to.

#

<Directory "/var/www/htdocs">

wpisz to co wpisales w documentroot

....

generalnie to zeby wszystko dzialalo jak trzeba (php, skrypty cgi etc.) to trzeba by jeszcze kupe rzeczy pozmieniac. ja nie wiem za co ten admin wzial kase... (nastepnym razem zadzwon do mnie ) zeby poustawiac kazde te twoja strone z /home, to trzeba by porobic virtualki na apaczu - duzo zabawy.

fungi · 4 Października 2004

Cos pokombinowalem - i wyswietlila sie czesc strony, jednak dalej jest kicha, bo wiekszosc stron mam opartych o css-y a te dzialaja tak, ze linki odnosza sie do domen - ktorej moj terminal niemoze znalesc. Jedynym wyjsciem jest to, zeby terminal z sieci wewnetrznej widzial strone pod odpowiednia domena, tak jak widza to inne termianle z zewnatrz. Powiedzcie teraz czy problem tkwi w routerze czy w serwerze. Pytanie numer 2. Dawniej moglem sie dostac na router z zewnatrz, po zewnetrznym adresie IP na porcie 80, teraz niedosc ze niemoge sie dostac po zewnetrznym, to i po wewnetrznym (router mam defaultowo ustawiony na IP 10.0.0.2, a moj super terminal mowi mi ze niemozna znalesc takiego serwera. - Czy zresetowanie routera cos pomoze? Czego to jest wina.

Kurde ale zawracam glowe - sorry, ale to dlamnie bardzo wazne.

Dzieki z gory za wyrozumialosc i cierpliwosc

Zaloguj się

Problem - potrzebuje rady i pomocy.

Rekomendowane odpowiedzi

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Odnośnik do komentarza

Udostępnij na innych stronach

Zarchiwizowany

Ostatnio przeglądający 0 użytkowników

Polecamy

Współpracują z nami

Powiadomienie o plikach cookie